Statistical Methods

Make a Welch power-spectrum estimate reproducible

Define the task

A power spectral density estimate depends on the sampling rate and analysis settings, not just the input sequence. Use equally spaced measurements with known units. Decide whether the sequence can be treated as approximately stable over the analyzed interval, and define how gaps, trends and artifacts are handled before examining prominent frequencies.

Carry out the check

Welch's method forms modified periodograms from segments and combines them. Record segment length, overlap, taper, FFT length, detrending and averaging rule. Density scaling has squared-measurement units per frequency unit, while spectrum scaling uses squared-measurement units. More zero padding makes a denser frequency grid without increasing the duration of each observed segment. Overlapping segments are not independent replications.

Worked hypothetical example

For a hypothetical sampling rate of 100 Hz with 200-sample segments and FFT length 200, the frequency grid spacing is 0.5 Hz. Changing FFT length to 400 gives 0.25 Hz spacing while leaving segment duration at 2 seconds. This does not double physical resolving power. If segment overlap is 100 samples, successive segments start one second apart. Report these settings with the spectrum and avoid identifying a physiological rhythm from a single unvalidated peak.

Method checked 15 November 2026 against SciPy documentation: welch.

Related reading

Reading path: Analyze data. Guide 151 of 152. Choose any guide to suit your project.

Statistical Methods

Center Predictors to Make Interaction Coefficients Interpretable

Change the reference point without claiming that centering removes an interaction or alters fitted predictions.

Statistical Methods

Estimate a Survey Subpopulation Without Losing Its Design

Define the target domain while retaining the sampling information needed for uncertainty.

Browse this reading pathTools for this stageGuides and downloads for this stage